Pay close attention to the installation method when installing peach-shaped post fences!

Wire mesh fence posts can be made in different styles depending on the needs: round steel pipes, square pipes, peach-shaped posts, dovetail posts, and C-shaped steel posts.
The installation method for peach-shaped post fences is different from that of other post fences. Other posts are installed first, and then the mesh is connected. However, this cannot be done with peach-shaped post fences. If you install the posts first, the mesh cannot be connected.
The installation method for peach-shaped post fences is: first, fix the first post, then hang the mesh onto the post, and then hang the second post. After connecting, fix the second post. Then hang the second mesh and the third post. After tightening the mesh, fix the third post. Continue in this manner, installing one set at a time. This installation is both secure and does not damage the mesh surface.
Precautions for peach-shaped post fence installation:
(1) It is wrong to use pliers to open the connecting groove. This will damage the surface protective layer of the fence and affect its service life. (2) Forcibly hanging the netting is also incorrect. This will cause the netting to deform and loosen.
(3) Increasing the spacing is even more unacceptable. This will cause the netting to loosen and easily fall off, thus failing to provide any protective function. The above are incorrect installation methods.