Daily care of stainless steel filter cylinder

There are more and more stainless steel filter mesh products, but not many people know about the daily care of stainless steel filter mesh. They think that stainless steel will never rust and has good corrosion resistance. In fact, this is not the case. Here are some care methods:
1. When there is dust and dirt on the surface of the stainless steel filter mesh, you can use soap, weak detergent or warm water to wash it.
2. The trademark and film on the surface of the stainless steel filter mesh should be washed with warm water and weak detergent. The adhesive components should be scrubbed with alcohol or organic solvents (ether, benzene).
3. Grease, oil, and lubricating oil pollution on the surface of the stainless steel filter mesh should be wiped clean with a soft cloth, and then cleaned with neutral detergent or ammonia solution or special detergent.
4. If there is bleach and various acids attached to the surface of the stainless steel filter mesh, rinse it with water immediately, then soak it with ammonia solution or neutral carbonated soda solution, and wash it with neutral detergent or warm water.
5. There are rainbow patterns on the surface of the stainless steel filter mesh, which is caused by excessive use of detergent or oil. It can be washed away with warm water and neutral detergent.
6. Rust caused by dirt on the surface of stainless steel can be washed with 10% nitric acid or abrasive detergent, or with special detergents.
7. The weak corrosion resistance of the passive film on the surface of the stainless steel filter cylinder forms pitting reaction due to self-excited reaction, generating small holes, and with the approach of chloride ions, a strong corrosive solution is formed, which accelerates the speed of corrosion reaction.
As long as we use the correct maintenance method, we can extend the service life of the stainless steel filter cylinder and keep it clean, bright and gorgeous.