Gabion net transportation construction

In order to facilitate the transportation and reduce the transportation cost, the gabion net is usually shipped after the cage is compressed and packed before delivery. Therefore, when the gabion net is transported to the destination, the first thing to do is to unzip it, and then pack the gabion Put the gabion on the flat ground and open it, flatten the remaining folds, assemble the gabion gabion into a box or cylinder according to the engineering standards, put in an appropriate amount of stones according to the engineering requirements, and seal the stones after placing them. When sealing, be sure to use thicker side wires and binding wires for binding. In addition, if it is a plastic-coated gabion, you must pay attention to protecting the surface of the plastic-coated gabion during the process of sewing and loading. layer, once the coating is damaged, the corrosion resistance will be reduced and the service life will be shortened.
        Gabion net refers to a box-shaped cage made of an angular net (hexagonal net) woven with metal wires. The diameter of the metal wire used depends on the size of the hexagonal shape. Therefore, it is also called "gabion net or gabion net box", and it is also called gabion net, gabion net and gabion net box abroad.
        Gabion nets are generally made of four pieces of heavy-duty hexagonal nets folded and assembled into a cage. A large hexagonal net is folded into four large sides of a cuboid, with two small pieces of hexagonal nets at both ends and a partition net in the middle.
        The cages can also be made into triangular or trapezoidal shapes. The slopes of such gabion net cages are piled up on a plane.
        Gabion nets are filled with stones at the construction site to form a flexible, water-permeable and integral structure, such as retaining walls, river channel linings, weirs and other anti-erosion projects. Gabion net bank revetment and slope protection and gabion net construction quality control