How to produce high-quality expanded metal mesh?

The expanded metal mesh factory produces high-quality expanded metal mesh products, and we need to pay attention to the following aspects:
1. Material selection: Expanded steel mesh is made of steel plate stamping and stretching, so when choosing a plate, it is necessary to choose a 195L material with a softer hardness;
2. Kaiping: The raw material belongs to the coil plate and needs to be flattened and cut to the corresponding size before production. Therefore, the plate with a relatively flat mesh surface should be selected, and the surface should not be distorted;
3. Debugging: In the production process of expanded metal mesh, the debugging of the machine is the key. The machine tool needs to be ground in place to avoid burrs, and the CNC needs to be debugged in place to avoid the phenomenon of broken stems, large and small stems, and distortion of the mesh surface;
4. Detection: After the commissioning is completed, it is necessary to continuously measure the size of the steel mesh stems and the length of the mesh surface during mass production. The commissioning is in place according to the required data, and continuous random inspection and measurement are required at intervals of several hours. If problems are found, they need to be adjusted in time. ;
5. Finished product: neatly placed, rolls need to be rolled up neatly, if placed, the whole roll is not neat, it is easy to be damaged during transportation.
6. Packaging: Generally, steel expanded mesh sheets and rolls are not packaged; aluminum expanded metal mesh and stainless expanded expanded metal cost are relatively high. To avoid wear and tear during transportation, it is recommended to choose a pallet + packaging material for double protection. It can not only avoid crushing, but also can be dustproof and waterproof.
The above are the key points of quality control in the production process of expanded metal mesh. Every responsible expanded metal mesh factory strictly controls these aspects. Of course, there are also some irresponsible factories, in order to save costs and choose inferior plates, they cannot strictly control the production process, resulting in a decrease in the qualified rate of products and losses to customers. Expanded mesh is a wire mesh product formed by metal sheet stretching. It has the characteristics of uniform holes, firm nodes, non-slip, wear-resistant, strong tensile strength, strong mesh surface and easy maintenance. It is widely used in many fields of production and life.