What are the requirements for hanging nets before wall plastering?

First of all, explain which parts need to be hung before plastering?
1. The junction of the masonry wall and the concrete columns, walls and beams of the primary structure.
2. At the junction of the flue and the wall, flue plastering is a weak link in plastering, and it must be done in place. It is recommended that the flue be covered with steel mesh and the length of the lap from the inner corner of the flue to the wall is not less than 10 cm. 3. The masonry wall involves the location where the installation pipeline needs to be slotted and routed. 4. At the junction between the back of the fire box and the wall on the wall of the public walkway, it is recommended that the back of the fire box be covered with steel mesh. The first four hanging nets are for different materials to form a whole under the constraint of the steel wire mesh, so that the plastering is not easy to crack. 5. It is special. In order to meet the seismic requirements, the infill wall of the stairwell also needs to be covered with steel mesh. Finally, I will introduce the construction details of the lower hanging net. The width of the hanging net is required in the specification that the overlapping width of the reinforcing net and different substrates should not be less than 10 cm. However, in order to ensure the quality of plastering construction, it is recommended to deal with 15 cm. The distance between the fixed and hanging net stickers should be guaranteed to be 15 cm to 20 cm. It is basically impossible for the length of a single wire mesh to meet the requirements of the hanging net. In order to facilitate construction, the hanging net and the net basically need to be overlapped, and the length of the overlap is not less than 10 cm. In addition, the hanging net should be flat and the nailing net should be firm to prevent the leakage of the net after plastering, which will affect the appearance quality of the plastering.