What are the requirements of hanging net before wall plastering?

First of all, explain which parts need to hang the net before plastering?  
1. The junction of masonry wall and concrete column, wall and beam of primary structure.  
2, the joint of the flue and the wall, the flue plastering is the weak link of plastering, it must be done, it is recommended that the flue is full of steel wire mesh and the flue Angle turn to the wall lap length is not less than 10 cm.  
3. The masonry wall relates to the location where the pipeline needs to be slotted for installation.  
4. At the junction between the back of the fire box and the wall on the wall of the public walkway, it is recommended that the back of the fire box be covered with wire mesh.  The first four hanging nets are for different materials to form a whole under the constraint of the wire mesh, so that the plaster is not easy to crack.  
5. In particular, in order to meet the seismic requirements, the stairwell filling wall also needs to be fully hung with steel wire mesh.  
Finally, the construction details of the hanging net are introduced. The width of the hanging net should not be less than 10 cm.  However, in order to ensure the quality of plastering construction, it is recommended to treat it in accordance with 15 cm.  The space between the adhesive pieces of the fixed hanging net should be 15cm to 20cm.
Basically, it is impossible for a wire mesh length to meet the requirements of the hanging parts of the net. In order to facilitate construction, lap joints are basically needed between the hanging net and the net, and the lap length is not less than 10 cm.  In addition, the hanging net should be smooth and the nail net should be firm to prevent net leakage after wiping the ash, which will affect the appearance quality of the plaster.